The Perch for Round Poles (The l).

Welcome to the internet's gathering place for Purple Martin enthusiasts
Post Reply
Posts: 74
Joined: Mon May 18, 2015 9:54 am
Location: Eastern nc

Has any one hung gourds from the aluminum Perch for Round Poles? Mine are one pound Bo Plus gourds. Wondering about the arm strengths I want to hang three..
Black Jack
Posts: 85
Joined: Mon May 06, 2019 4:37 pm
Location: NC

These? A hail storm hit mine and broke as shown in picture. I have never liked them because they are drilled for cotter key and are weak.
P6020025.JPG (79.05 KiB) Viewed 958 times
P6020024.JPG (76.95 KiB) Viewed 958 times
P6020023.JPG (82.68 KiB) Viewed 958 times
P6020020.JPG (79.11 KiB) Viewed 958 times
Posts: 74
Joined: Mon May 18, 2015 9:54 am
Location: Eastern nc

Not good. Thanks. You are adding to the growing knowledge.
Dave Duit
Posts: 1822
Joined: Tue Nov 25, 2003 2:02 pm
Location: Iowa / Nevada
Martin Colony History: In 2020, 60 pair with 285 fledged youngsters. 83 total cavities available, 58 Troyer Horizontal gourds and 4 modified deep trio metal house units, 1 fallout shelter, owl cages around all units. Martin educator and speaker. President and founder of the Iowa Purple Martin Organization. Please visit and join.

I had a similar experience when I just started out in the purple martin hobby. So, in sum I had my cousin Mike Oliver weld a 24 steel circular gourd rack with a sqaure hub that rode up and down on a 4 inch heavy duty square pole that was cemented witha full cubic yard of cement. I have had over 90 mph winds come through and it basically moved about 1/4 inch during the winds. If you can and have the resources, I would suggest building your own and be sure to over beef it up.
Mite control, heat venting, predator protection and additional feeding during bad weather add up to success.
Post Reply